Thread Tension Gauge FOR TAJIMA SWF Ricoma Commercial Embroidery Machines

Description

1. Part number: KP-19243
2. Part name: Thread Tension Gauge
3. Quantity: 1PCS
4. Description
a.Tajima's pencil style tension gauge for setting proper top thread tensions.
b.The Tajima top thread pencil style tension gauge has a hook on one side with a slide guide that is used to set top thread tension on commercial embroidery machines. The slide needle works with a spring to indicate if you need to tighten or loosen top thread tension.
c.How to use:
To check your top thread tension, have your embroidery thread correctly threaded through your machine’s running path including through the needle and presser foot. Wrap the end of the embroidery thread around the hook end on the gauge so that it catches without slipping. Slowly and steadily pull the gauge back toward yourself. Note the common number seen on the gauge’s needle.
Top thread tensions may vary up or down by as much as 5 to 10 gf.
Rayon #40: 150gf
Polyneon #40: 170gf
Metallic #40-50: 170gf
Polyester CR #40: 125gf
Burmilana #12: 190gf
5. Technical supports
1) In case you are not sure if these parts are compatible with your machine, please feel free to send us a message via ebay, our technicians will provide you with professional and accurate advice in 24/7.
2) Do not hesitate to contact us if you run into any issue using the received parts.
3) Please provide us with your machine brand and complete model for technical supports.